RTJ2HL Gas Pressure Regulator Factory China Industrial Gas Control Suppliers
The RTJ2-/HL series gas pressure regulator is a high-precision industrial solution engineered for the stable regulation of non-corrosive gases, including natural gas, coal gas, and liquefied petroleum gas (LPG). Built to meet the rigorous GB27790-2020 City Gas Pressure Regulator standards, this axial-flow type regulator ensures consistent downstream pressure delivery, minimizing deviation even under full load conditions for maximum system reliability.
Designed for heavy-duty industrial environments, the HL series features a robust modular construction that simplifies on-line maintenance and extends the equipment's operational lifespan. By integrating a balance valve design and optional silencers for noise reduction, it provides an optimal combination of high-precision control, rapid membrane response, and structural durability, making it an essential component for safe and efficient gas distribution networks.
Detailed Parameters
| Nominal Pressure | Class 150 ~ Class 900 (2 MPa - 16 MPa) | Nominal Size | DN25 ~ DN400 (NPS 1" ~ NPS 16") |
|---|---|---|---|
| Connection Mode | ANSI B16.5 RF, RTJ Flange | Design Temperature | -29°C to 60°C / -46°C to 60°C |
| Max Inlet Pressure | Up to 10 MPa (Depending on flange class) | Outlet Pressure Range | 0.1 MPa to 8.0 MPa |
| Precision Class | AC +1% (AC1), +2.5% (AC2.5), +5% (AC5) | Closing Pressure Rating | SG 2.5% (SG2.5), 5% (SG5), 10% (SG10) |
| Implementation Std | EN 334 / GB27790-2020 | Applicable Media | Natural Gas, Coal Gas, LPG (Non-corrosive) |
Key Advantages
Superior Sealing
The specialized valve barrel design ensures a tight, leak-proof seal, preventing hazardous gas escapes and enhancing site safety.
Rapid Response
The high-sensitivity membrane ensures extremely short response times under full load, maintaining pressure stability during flow fluctuations.
High Precision
Balance valve design minimizes pressure deviation at full load, ensuring the most accurate gas flow regulation in the industry.
Noise Reduction
Equippable with professional silencers to significantly reduce operational noise, meeting strict urban environmental standards.
Visual Monitoring
Integrated valve position and travel indicators allow operators to monitor regulator status at a glance without dismantling.
Modular Design
Simplified structure with fewer components enables easy on-line maintenance and rapid part replacement to minimize downtime.
Product Gallery
Management Platforms
Integrated Device Series
Full synchronization with comprehensive device arrays for seamless gas network integration.
Voltage Regulator Series
Coordinated stability management across both mechanical and electrical regulating systems.
Safety Device Series
Direct linkage with emergency shut-off and safety relief valves for maximum risk mitigation.
Control System Hub
Centralized monitoring of downstream pressure levels and flow rate adjustments.
Vessel Series Sync
Optimized pressure regulation for storage vessels to prevent over-pressurization.
Peak Shaving Equipment
Specialized control for point supply and peak shaving to handle volatile demand cycles.
Investment Return Comparison
| Performance Metric | Standard Regulator | RTJ2-/HL Series |
|---|---|---|
| Maintenance Cycle | Frequent / High Cost | Extended / Low Cost |
| Pressure Deviation | Moderate (±5%+) | Ultra-Low (±1% - 2.5%) |
| Operational Noise | High / Disruptive | Low (with Silencer) |
| Service Lifespan | Standard Industrial | Extended Heavy-Duty |
| System Downtime | Long (Complex Repair) | Short (Modular Design) |
Frequently Asked Questions
Q: Which gases are compatible with the RTJ2-/HL series regulator?
It is specifically designed for non-corrosive gases, including natural gas, coal gas, and liquefied petroleum gas (LPG).
Q: How do I adjust the outlet pressure of the HL series regulator?
Locate the adjustment screw under the top protective cap. Turn clockwise to increase outlet pressure and counterclockwise to decrease it, making small increments while monitoring the gauge.
Q: What causes "hunting" or pressure fluctuations in these regulators?
Pressure fluctuations (hunting) are typically caused by excessive upstream pressure, flow turbulence, incorrect regulator sizing, or a blocked vent line.
Q: Does the RTJ2-/HL comply with international standards?
Yes, it is fabricated according to the GB27790-2020 standard for city gas pressure regulators and supports ANSI B16.5 flange connections and EN 334 implementation.
Q: What are the signs that a diaphragm needs replacement?
Common signs include failure to maintain set pressure, visible leaks, or a complete lack of response when adjusting the pressure screw.
Q: Is on-line maintenance possible with this model?
Yes, the modular design and simplified structure are specifically engineered to facilitate easier on-line maintenance, reducing system downtime.
Ready to optimize your gas pressure control system?
Contact UsWrite your message here and send it to us
Products categories
