Nov . 17, 2026 00:25 Back to list

How to Choose a Safety Valve for a Low-Pressure Gas Line

A self-closing valve suits in-house low-pressure gas systems that need automatic shutoff during under-pressure, overpressure, or loss of pressure. Check the gas medium, connection point, thread, and available installation space before selecting it.

How to Choose a Safety Valve for a Low-Pressure Gas Line
Illustration for reference; see the product page for actual photos and specifications.

A safety valve for an in-house low-pressure gas line should match the gas medium, the connection point, and the way the line must respond to pressure changes. Our Self-Closing Valve is intended for automatic shutoff without electricity or another external power source, followed by manual reset.

Match the valve to the gas system

The Self-Closing Valve is suitable for natural gas, coal gas, liquefied petroleum gas, and other non-corrosive gases. Use it where the pipeline needs a valve that can close automatically during under-pressure, overpressure, or loss of pressure.

This product fits the connection between the rear end of a gas meter and the rubber pipe end. It is also intended for low-pressure gas pipeline systems installed in a house. If your installation uses a different medium or connection point, confirm the system requirements before ordering.

Check the shutdown behavior

Automatic closing does not require electricity or another external power source. The valve responds when the gas supply pressure changes beyond the safety set value, helping cut off the gas source during abnormal supply conditions, a gas supply stop, or a falling-off rubber pipe.

After closing, the valve needs to be opened manually. This makes the Self-Closing Valve suitable for systems where the operator must identify the condition and reset the valve instead of allowing the gas supply to resume automatically.

Confirm the connection and installation space

The connection size is a G1/2\" thread. Check the mating connection and measure the available space around the valve before placing it in the line.

ParameterValue
Connection sizeG1/2\" thread
Nominal pass-through diameterDN15
Length116 mm
Height64 mm

The valve has a clear working status and is designed for installation and use in the gas line. Keep the connection, orientation, and surrounding clearance consistent with your installation requirements.

What to weigh

Gas medium and service · natural gas, coal gas, liquefied petroleum gas, or another non-corrosive gas

Connection and reset · G1/2" thread, automatic closure, and manual opening after shutdown

Your shortlist

Self-Closing Valve · in-house low-pressure gas lines at a gas meter and rubber pipe connection

Choose it for controlled manual reset

Pick the Self-Closing Valve when your gas system needs three defined actions: automatic closure after under-pressure, overpressure, or loss of pressure; no electrical or external power for the closing action; and manual opening after the condition has been checked.

It is a practical fit for an in-house low-pressure gas connection at the gas meter and rubber pipe. Before ordering, send the gas medium, connection details, and available installation dimensions for a compatibility check.

The company

HEBEI OUYINUO GAS EQUIPMENT CO.,LTD.

A reliable manufacturer of gas pressure regulating equipment in China In the 1970s, the former Zaoqiang County Agricultural Machinery Plant introduced the production technology of the gas pressure regulating products from Northern China Design Institute of China Municipal Engineering, and therefore the gas equipment manufacturing industry struck a root in Hebei.…

About Us ↗Visit company website ↗


Share

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.